NATIONAL ENAMEL 809 : 18 L OFF WHITE
PRODUCT DESCRIPTION
It is a general – purpose, economical synthetic enamel, based on alkyd resin, for architectural and decorative paints for wooden, masonry, steel and other surfaces. It dries to give high gloss film, resistant to cracks and withstands abrasions. It has good weather resistance and washability. It has very good adhesion on interior/exterior surfaces.
RECOMMENDED USES
It is recommended as architectural decorative paints for masonry, metal etc. surfaces in domestic and moderate environments. It is not suitable for constant water immersion or over coating of zinc primed steel. It has very good hiding power and can hide minor surface imperfections. It is used for only air – drying purpose, it is preferred for interior use.
TECHNICAL DATA
| COLOUR, DRY FILM | Off White |
| FINISH, DRY FILM | Smooth / Glossy |
| VOLUME SOLIDS (ASTM D2697) | 43 ± 2% |
| SPECIFIC GRAVITY | 1.09 ± 0.05 (White and Pastel Colours) |
| THEORETICAL SPREADING | 14.0 – 11.0 M2 / LTR (Depends on the surface) |
| RECOMMENDED DFT (DRY FILM) | 30 – 40 Microns / Coat |
| RECOMMENDED WFT (WET FILM) | 70 – 95 Microns / Coat |
| FLASH POINT | 38°C |
DRYING TIME
Drying time @ 30°C (Temperature, humidity, air movement, film thickness and number of coats all affect the drying time.)
| TOUCH DRY | 6 – 8 hours |
| DRY TO RECOAT | 24 hours |
| FULL DRY | 24 hours |
